ATC CNC router tool system
Home » News » Training » ATC CNC router tool system

ATC CNC router tool system

Views: 0     Author: Site Editor     Publish Time: 2021-08-12      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

In traditional CNC tool change, the tool on the spindle needs to be sent back to the tool magazine, and then the new tool can be taken out of the tool magazine. Because these two actions run separately, the tool change time is longer and the processing efficiency is low. The ATC CNC router can accurately transport the tools required for the next step of processing to the tool change position according to the system program instructions, and at the same time receive the tools used in the previous step. This saves time and improves work efficiency.

The ATC CNC router tool system is aimed at CNC machine tools, and the tool and the machine tool interface have been developed when the matching tools can be quickly replaced and efficiently cut. The tool system can be classified as follows:


  • Integral handle

  • Modular tool holder

 

Integral handle

The boring and milling type integral tool system and the T S G system are used in tool assembly, where the armor does not change or is not suitable for use in modular tool holders.

 

Modular tool holder

The boring and milling modular tool system is the TM tool system. By combining the basic tool holder connecting rod and the extension rod, many types of tool holders can be formed.

Modular tool advantages: reduce tool change time and tool installation times, promote the development of tool standardization and systemization, improve tool management and flexible processing level, expand utilization, give full play to tool performance, reduce tool reserve

 

ATC CNC router tool features

Very high cutting efficiency

High accuracy and repeat positioning accuracy

High reliability and durability

Tool size pre-adjustment and quick tool change

Perfect tool system and tool management system

There should be an online tool monitoring and size compensation system.

 

Due to the limited tool capacity of the overhead turret head, the CNC machine tools now use the tool pants + ATC device to change the tool ATC CNC router, including changes to the tools needed in the process. After the standard tool holder is adjusted outside the machine, enter the tool in a certain way. In the library, the tool exchange device takes the tools from the tool magazine and exchanges them with the spindle.

Compared with the spindle head of the turret, the spindle box of the CNC machine tool with the automatic tool changer of the tool magazine has only one spindle, and the rigidity of the spindle components is high, which can meet various complex and precise processing requirements.

In addition, due to a large number of tools in the tool magazine, the complex parts can be clamped to complete the processing of multiple procedures at one time, and the processing adaptability and processing effect of CNC are required to be improved.

 

Shandong U-May CNC Technology Co., Ltd. is a new technology company focusing on machinery R&D, design, and manufacturing. The company is positioned to produce high-quality engraving brands and adheres to the concept of "Customer is God". ATC CNC router is one of the company's many products. If there is any problem, there are experts who can provide online remote support and training, and can contact Utech Technical support experts contact real-time remote diagnosis. Door-to-door service is also provided.


Contact us
///UTECH" became the company's new logo, and the company's development philosophy "Smarter Solution, Better Tomorrow.

| Quick Navigation

| Contact Information
Sofia Yi 
Whatsapp/Wechat/Tel: +86 186 6371 6521
Leave a Message
Contact us
Inquiry
Copyright @ 2021 Shandong U-May CNC Technology Co., Ltd. All Rights Reserved . Technology by Leadong