Daily inspection of ATC CNC router

ATC CNC router is the most powerful category among CNC router machines. Although the engraving strength and speed are not comparable to other CNC engraving machines, as ATC CNC router equipment, daily inspection and maintenance are also very necessary. There is a clear difference between the detection of ordinary wood CNC routers and stone engraving machines and the diagnosis method of engraving faults. The daily detection and fault diagnosis methods of the ATC CNC router are introduced in detail：

• ATC CNC router machine tool operation inspection method

• State analysis method

• Programming Check Method

• System self-diagnosis method

  
  

ATC CNC router machine tool operation inspection method

The ATC CNC router operation inspection method is to observe and monitor the actual operation of the machine tool to determine the position of the malfunction and trace the root cause of the fault. CNC machine tools, Generally speaking, CNC machine tools adopt hydraulic and pneumatic control parts, such as automatic tool changers, exchange table devices, fixtures and transmission devices, etc.。 It can be used to determine the cause of the failure through the performance of the machine in the working process.

State analysis

The ATC CNC router system can not only display fault diagnosis information but also provide various states of diagnosis in the form of diagnosis addresses and diagnosis data. For CNC machine tools, for example, when the system returns to the reference point incorrectly, you can view the status values of related parameters to determine the cause of the failure.

Programming check

The programming check method is also called the program function test method. It is a method to confirm the cause of the failure by compiling a special test program segment. This method of CNC machine tool can use the manual programming method of the system functions (such as linear positioning, circular interpolation, thread cutting, canned cycle, user macro program, etc.) to compile a function test program, and run the test program to check The accuracy and reliability of the machine tool to perform these functions, and then determine the cause of the failure. Usually, a test program is written with the instructions of the machine tool to be repaired, and the program is run in the event of a failure to determine what the failure is.

System self-diagnosis

The self-diagnosis of the ATC CNC router system is a diagnostic method that uses the internal self-diagnosis program or special diagnostic software of the system to self-diagnose and test the key hardware inside the system and the control software of the system.

Mainly include power-on self-diagnosis, online monitoring, and offline testing. The CNC router machine uses the system's self-diagnostic function to easily display the interface signal status between the system and each part, and find out the approximate location of the fault, which is the most commonly used method in the fault diagnosis process.

Shandong U-May CNC Technology Co., Ltd. has a complete and scientific quality management system, rich experience and a team of experts that can solve problems for customers in a comprehensive way.