Disable wood CNC router alarm

The wood CNC router is widely used and powerful. Don't doubt it. It has been widely used in all walks of life and plays a very important role in the processing and production of enterprises. The wood CNC router is running at high speed 24 hours a day, and, inevitably, more or fewer problems such as this and other problems sometimes occur. As the operator of a wood CNC router, it is the key to use the woodworking engraving machine technology level he has mastered to solve the current problem without hurriedly discussing when the fault occurs. It is common for the wood CNC router to alarm during use. As for how to solve the alarm sound immediately and resume normal production operation immediately, it will be a top priority. 

Therefore, the following is a detailed analysis of the method of removing the alarm of the wood CNC router.

1. How to cancel the over-travel alarm sound of a wood CNC router

2. The reason for wood CNC router alarm failure

How to cancel the over-travel alarm sound of a wood CNC router

If you want to move the worktable of the engraving machine, please pay attention to the direction of movement and keep it away from the extreme position;

When the limit alarm sounds, you need to clear the XYZ set in the coordinates;

If all the motion axes of the woodworking engraving machine are automatically set in the jog state, as long as you keep pressing the manual direction key, when the machine leaves the limit position (that is, out of the overtravel point switch), the connected motion state will be restored at any time.

The reason for wood CNC router alarm failure

If the wood CNC router has a long alarm sound, it means that the CNC woodworking engraving machine has reached the limit position during the operation. Then you need to check the alarm fault according to the following steps:

Check whether the current coordinate value of the engraving machine exceeds the value range of the software limit;

Confirm whether the connection between the computer and wood CNC router is correct;

Check whether the connecting wire between the main shaft of the wood CNC router motor and the lead screw is loose;

Check whether the designed engraving figure size exceeds the engraving range. 

As long as the wood CNC router operators use the engraving machine carefully following the operating process, strictly abide by the operating regulations of the engraving machine, participate in the pre-job engraving machine use training, and be proficient in the above-mentioned methods of disabling the woodworking engraving machine alarm, and improve the engraving machine Operating skills, even if you encounter any failure problems, you can easily solve all kinds of engraving machine failure problems.

Shandong U-May CNC Technology Co., Ltd. is a new technology company focusing on machinery R&D, design, and manufacturing. Give full play to the comprehensive advantages in development, help each other, maximize strengths and avoid weaknesses, and seek progress while maintaining stability!