The wood CNC router is widely used and powerful. Don't doubt it. It has been widely used in all walks of life and plays a very important role in the processing and production of enterprises. The wood CNC router is running at high speed 24 hours a day, and, inevitably, more or fewer problems such as this and other problems sometimes occur. As the operator of a wood CNC router, it is the key to use the woodworking engraving machine technology level he has mastered to solve the current problem without hurriedly discussing when the fault occurs. It is common for the wood CNC router to alarm during use. As for how to solve the alarm sound immediately and resume normal production operation immediately, it will be a top priority.

Cutting generally refers to the cutting of metal. A plasma cutting machine is a cutting method that uses a very thin and high-temperature plasma arc to quickly melt the local metal and then blow the molten metal away with an airflow. The X-axis adopts a high-precision linear circular guide rail, and the Y-axis adopts a high-precision linear guide rail, which has less running resistance. The straightness error of the two rails of the X-axis is guaranteed to be less than ±0.05mm, and the vertical error of the X-axis and Y-axis is not more than ±0.05mm. The running trolley adopts a lightweight structure. Under the action of air pressure, voltage, and magnetic field, the columnar free arc (which can be compressed into a plasma arc, the conductive section of the plasma arc has a small energy concentration. The gas in the arc column can almost reach the ion state. The arc temperature can be as high as 15000℃-30000 ℃. It can quickly melt metal and other objects.

The wood CNC router has great functions and complete functions. However, with the continuous progress of social development, the needs of production enterprises are increasing, and people need higher production efficiency to create more profit value. the wood CNC router is mainly used for wood proce

The plasma cutting machine is a new type of thermal cutting equipment. Its working principle is to use compressed air as the working gas, high-temperature and high-speed plasma arc as the heat source, to partially melt the cut metal, and at the same time to use high-speed airflow to melt the molten