Wood CNC router engraving dislocation

The dislocation of wood CNC routers during the engraving process is a common occurrence. To trace the reason, the wood CNC router has many accessories, complicated circuits, and interlocking. It is closely connected, which involves many problems, so in the engraving process, It's not surprising that there are such misalignments. Before the wood CNC router misalignment, the performance is not chaotic and calm, and all the engraving misalignment problems are resolved easily and orderly. So, what are the common reasons for engraving misalignment on woodworking engraving machines?

1. wood CNC router body reason

2. wood CNC router spindle motor reason

3. wood CNC router machine line break

4. wood CNC router voltage reason

5. wood CNC router interface reason

6. wood CNC router drive reason

Wood CNC router body reason

Wood CNC router body causes engraving misalignment; a certain part of the engraving machine tool is faulty or loose, and there are impurities on the surface, etc., and misalignment will occur. For example, if the coupling is loose or broken, the engraving will be misaligned; the guide rail and the lead screw will not be cleaned and oiled for time, which will also cause misalignment.

Wood CNC router spindle motor reason

The spindle motor causes the engraving misalignment; if it is a stepper motor or a servo motor, the entire machine does not move in a certain direction, and the screw cannot be turned by hand.

Wood CNC router machine line break

The wood CNC router machine tool line is broken and the engraving is misaligned; the machine line is all broken. Is there any reason why the engraving is misplaced?

Wood CNC router voltage reason

The voltage causes the engraving misalignment; the engraving machine requires a lot of power when it is working. If the voltage is too low to supply the driver with insufficient power, then the power will not meet the requirements and will cause engraving misalignment, usually, the y-axis is mostly. This phenomenon may occur because the external voltage is not enough, or someone uses high-power equipment such as electric welding on the same line. A good way to solve this is to install a 50000 watt stabilized power supply, but the error of this stabilized power supply The range cannot exceed 5%, preferably within 3%.

Wood CNC router interface reason

The interface board, mainboard, and adapter board cause engraving misalignment; if the interface board, mainboard, and adapter board of the engraving machine are broken, the machine will not move in a certain direction or three axes during the working process, resulting in engraving dislocation.

Wood CNC router drive reason

The drive causes the engraving misalignment; the wood CNC router drive will cause the engraving misalignment when the structure or electronic components fail, which is the most common cause. If the number of occurrences is small and the speed is lowered, sometimes it can be engraved normally. This means that the drive has not been completely broken. If the drive is misplaced at the beginning of engraving, it means that the drive has been completely broken. This kind of drive can be repaired or worsened.

The above content has been reviewed by a wood CNC router. There are 6 common reasons for engraving misalignment. Shandong U-May CNC Technology Co., Ltd. can provide technical support to help customers make full use of this machine. Various technical documents and installation videos will be placed in the U disk and shipped together with the device. Dedicated technical experts can provide online remote support and training. You can use it with confidence.